From compliance at sfconservancy.org Mon May 18 19:02:35 2026 From: compliance at sfconservancy.org (Denver Gingerich) Date: Mon, 18 May 2026 19:02:35 -0000 Subject: Bambu Studio (Linux) 2.4.0 Message-ID: <21a101fa-52ec-11f1-9d8a-fa163e0cfb5f@sfconservancy.org> We've just published the following new candidate: Bambu Studio (Linux) 2.4.0 Vendor: Bambu Lab Device: Bambu Studio Released: 2025-11-18 We found the source candidate here alongside the AppImage file in the image .tar.xz file, and installing/running that AppImage file downloads the libbambu_networking.so file also found in the image .tar.xz file. An initial review suggests partial source for the AppImage file, but no source code at all for the .so file, even though full source code is required for both under AGPLv3. To view this candidate and download the source candidate and firmware image, visit: https://sfconservancy.org/usethesource/candidate/bambu-studio-linux-240/ -- Denver Gingerich (Via https://sfconservancy.org/usethesource/) From compliance at sfconservancy.org Mon May 18 19:06:12 2026 From: compliance at sfconservancy.org (Denver Gingerich) Date: Mon, 18 May 2026 19:06:12 -0000 Subject: Bambu Studio (Linux) 2.4.0 In-Reply-To: <21a101fa-52ec-11f1-9d8a-fa163e0cfb5f@sfconservancy.org> Message-ID: We at SFC have started a project to add the missing source code (either by reverse engineering, or once it is received from Bambu Lab). We encourage people to join our effort so we can get people full freedom in their Bambu Studio software (and related printing)! Check it out at https://f.sfconservancy.org/baltobu/viscose To view this candidate and download the source candidate and firmware image, visit: https://sfconservancy.org/usethesource/candidate/bambu-studio-linux-240/ -- Denver Gingerich (Via https://sfconservancy.org/usethesource/) From compliance at sfconservancy.org Mon May 18 19:08:47 2026 From: compliance at sfconservancy.org (Denver Gingerich) Date: Mon, 18 May 2026 19:08:47 -0000 Subject: Bambu Studio (Windows) 2.5.0.66 Message-ID: We've just published the following new candidate: Bambu Studio (Windows) 2.5.0.66 Vendor: Bambu Lab Device: Bambu Studio Released: 2026-01-28 We found the source candidate here alongside the .exe file in the image ZIP file, and installing/running that .exe file downloads the bambu_networking.dll file also found in the image ZIP file. An initial review suggests partial source for the .exe file, but no source code at all for the .dll file, even though full source code is required for both under AGPLv3. To view this candidate and download the source candidate and firmware image, visit: https://sfconservancy.org/usethesource/candidate/bambu-studio-windows-25066/ -- Denver Gingerich (Via https://sfconservancy.org/usethesource/) From compliance at sfconservancy.org Mon May 18 19:10:18 2026 From: compliance at sfconservancy.org (Denver Gingerich) Date: Mon, 18 May 2026 19:10:18 -0000 Subject: Bambu Studio (Windows) 2.5.0.66 In-Reply-To: Message-ID: <3575c782-52ed-11f1-9d8a-fa163e0cfb5f@sfconservancy.org> We at SFC have started a project to add the missing source code (either by reverse engineering, or once it is received from Bambu Lab). We encourage people to join our effort so we can get people full freedom in their Bambu Studio software (and related printing)! Check it out at https://f.sfconservancy.org/baltobu/viscose To view this candidate and download the source candidate and firmware image, visit: https://sfconservancy.org/usethesource/candidate/bambu-studio-windows-25066/ -- Denver Gingerich (Via https://sfconservancy.org/usethesource/)