Requirements error in Kallithea 0.7.0
Tom Gelsthorpe
tom.gelsthorpe at 2e-systems.com
Wed Sep 15 14:20:07 UTC 2021
Hello,
thank you so much for your help.
I had install --update setuptools
which raised the version from 39.2.0 to 58.0.4
here is the complete error message:
> Collecting FormEncode<1.4,>=1.3.1
> Downloading FormEncode-1.3.1.tar.gz (197 kB)
> ERROR: Command errored out with exit status 1:
> command: /opt/kallithea/venv/bin/python3 -c 'import io, os, sys,
> setuptools, tokenize; sys.argv[0] =
> '"'"'/tmp/pip-install-v81k9zcv/formencode_835feceb887f4a1989cbd3d85d056740/setup.py'"'"';
> __file__='"'"'/tmp/pip-install-v81k9zcv/formencode_835feceb887f4a1989cbd3d85d056740/setup.py'"'"';f
> = getattr(tokenize, '"'"'open'"'"', open)(__file__) if
> os.path.exists(__file__) else io.StringIO('"'"'from setuptools import
> setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"',
> '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))'
> egg_info --egg-base /tmp/pip-pip-egg-info-b2h_0m66
> cwd:
> /tmp/pip-install-v81k9zcv/formencode_835feceb887f4a1989cbd3d85d056740/
> Complete output (3 lines):
> /usr/lib64/python3.6/distutils/dist.py:261: UserWarning: Unknown
> distribution option: 'convert_2to3_doctests'
> warnings.warn(msg)
> error in FormEncode setup command: use_2to3 is invalid.
> ----------------------------------------
> WARNING: Discarding
> https://files.pythonhosted.org/packages/2f/53/707c2b9b65ea6bedde67c21cbf7c71394f4a198620d4e9c1771214b91dcc/FormEncode-1.3.1.tar.gz#sha256=ada2f51792b1b484e5bb7b6cc14acfc1bc11fafc967cf015cd57e856053ca7f6
> (from https://pypi.org/simple/formencode/). Command errored out with
> exit status 1: python setup.py egg_info Check the logs for full
> command output.
> ERROR: Could not find a version that satisfies the requirement
> FormEncode<1.4,>=1.3.1 (from kallithea) (from versions: 0.2, 0.2.1,
> 0.2.2, 0.3, 0.4, 0.5, 0.5.1, 0.6, 0.7, 0.7.1, 0.9, 1.0, 1.0.1, 1.1,
> 1.2, 1.2.1, 1.2.2, 1.2.3.dev0, 1.2.4, 1.2.5, 1.2.6, 1.3.0a1, 1.3.0,
> 1.3.1, 2.0.0a1, 2.0.0)
The solution is to fix the setuptools version < 58.0.0, >=36
https://setuptools.readthedocs.io/en/latest/history.html
v58.0.0 04 Sep 2021 Breaking Changes¶
<https://setuptools.readthedocs.io/en/latest/history.html#breaking-changes>
*
#2086 <https://github.com/pypa/setuptools/issues/2086>:Removed
support for 2to3 during builds. Projects should port to a unified
codebase or pin to an older version of Setuptools usingPEP 518
<https://www.python.org/dev/peps/pep-0518/>build-requires."
On 15.09.2021 14:18, toras wrote:
> Hello
>
> I'm not familiar with this issue, but I'm posting this for your
> information.
> I encountered a similar problem with docker ubuntu image (Install pip
> with get-pip.py).
>
> In the error log,
> "Unknown distribution option: 'convert_2to3_doctests'"
> and
> "error in FormEncode setup command: use_2to3 is invalid."
> message is included.
>
> Maybe this has something to do with it.
> https://github.com/pypa/setuptools/issues/1120
>
> Apparently, it means that 2to3 is no longer available in setuptools 58?
>
> ----
>
> On 2021/09/15 18:23, Thomas De Schampheleire wrote:
>> Hello,
>>
>> El mié, 15 sept 2021 a las 10:57, Tom Gelsthorpe
>> (<tom.gelsthorpe at 2e-systems.com>) escribió:
>>>
>>> Hi,
>>>
>>> please have a look at this, it was working until about 10 days ago
>>>
>>> pip install --upgrade kallithea==0.7.0
>>>
>>> but now I get
>>>
>>> ERROR: Could not find a version that satisfies the requirement
>>> FormEncode<1.4,>=1.3.1 (from kallithea) (from versions: 0.2, 0.2.1,
>>> 0.2.2, 0.3, 0.4, 0.5, 0.5.1, 0.6, 0.7, 0.7.1, 0.9, 1.0, 1.0.1, 1.1,
>>> 1.2,
>>> 1.2.1, 1.2.2, 1.2.3.dev0, 1.2.4, 1.2.5, 1.2.6, 1.3.0a1, 1.3.0, 1.3.1,
>>> 2.0.0a1, 2.0.0)
>>> ERROR: No matching distribution found for FormEncode<1.4,>=1.3.1
>>>
>>> so FormEncode went from 1.3.1 to 2.0.0
>>>
>>> the version check in setup.py at line 53 fails:
>>>
>>> "FormEncode >= 1.3.1, < 1.4",
>>>
>>
>> I don't see this problem.
>> I created a fresh virtualenv and ran the command you showed.
>> I get following set of packages:
>>
>> pip freeze
>> alembic==1.4.3
>> amqp==5.0.6
>> Babel==2.8.1
>> backlash==0.3.1
>> bcrypt==3.1.7
>> Beaker==1.11.0
>> billiard==3.6.4.0
>> bleach==3.1.3
>> celery==5.0.5
>> certifi==2021.5.30
>> cffi==1.14.6
>> chardet==4.0.0
>> click==7.1.2
>> click-didyoumean==0.0.3
>> click-plugins==1.1.1
>> click-repl==0.2.0
>> crank==0.8.1
>> decorator==4.4.2
>> docutils==0.16
>> dulwich==0.19.16
>> FormEncode==1.3.1
>> gearbox==0.2.1
>> hupper==1.10.3
>> ipaddr==2.2.0
>> Kallithea==0.7.0
>> kombu==5.1.0
>> Mako==1.1.5
>> Markdown==3.1.1
>> MarkupSafe==2.0.1
>> mercurial==5.8.1
>> paginate==0.5.6
>> paginate-sqlalchemy==0.3.1
>> Paste==3.4.6
>> PasteDeploy==2.1.1
>> prompt-toolkit==3.0.20
>> pycparser==2.20
>> Pygments==2.6.1
>> python-dateutil==2.8.2
>> python-editor==1.0.4
>> pytz==2021.1
>> repoze.lru==0.7
>> Routes==2.4.1
>> six==1.16.0
>> SQLAlchemy==1.3.24
>> Tempita==0.5.2
>> tgext.routes==0.2.1
>> TurboGears2==2.4.3
>> urllib3==1.26.6
>> URLObject==2.4.3
>> vine==5.0.0
>> waitress==1.4.4
>> wcwidth==0.2.5
>> webencodings==0.5.1
>> WebHelpers2==2.0
>> WebOb==1.8.7
>> Whoosh==2.7.4
>>
>>
>>
>> Note that in the list in your output, FormEncode 1.3.1 is still
>> present and is the intended version.
>>
>> It looks to me as if there is another package in your virtualenv that
>> explicitly expects another version.
>> Do you get the same problem from a fresh virtualenv?
>>
>> I think it must be possible to let pip give more verbose output about
>> why it did not consider FormEncode 1.3.1.
>>
>> Best regards,
>> Thomas
>> _______________________________________________
>> kallithea-general mailing list
>> kallithea-general at sfconservancy.org
>> https://lists.sfconservancy.org/mailman/listinfo/kallithea-general
>>
>
> _______________________________________________
> kallithea-general mailing list
> kallithea-general at sfconservancy.org
> https://lists.sfconservancy.org/mailman/listinfo/kallithea-general
--
Tom Gelsthorpe
Technical Support Analyst
2e Systems
Tel: +49 6196 - 950 58 28
Fax: +49 6196 - 950 58 94
E-mail: tom.gelsthorpe at 2e-systems.com
Address: 2e Systems GmbH, Koenigsteiner Str. 107, 65812 Bad Soden am Taunus
Company registration: Amtsgericht Koenigstein (Germany), HRB 7303
Director: Philip Douglas
http://www.2e-systems.com - making your business fly!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sfconservancy.org/pipermail/kallithea-general/attachments/20210915/6b692431/attachment-0001.html>
More information about the kallithea-general
mailing list